Hog Equipment
Feeding Equipment
Feed Storage Tanks
Sure Flo Agitator
Flex-Flo System
Boot & Unloaders
Chain Disk Systems
Feeders
Tube Feeders
Wet-Dry Feeders
Dry Feeders
Ventilation Systems
Climate Controllers
Fans
Belt Drive Fans
Performer Fans
Fan Accessories
Inlets & Baffles
Alarms
Evaporative Cooling
Misting & Soaker System
Curtain Systems

Sidewall Curtains

Parlor Curtains
Machines/Parts
Sorting Scales
Automatic Sorting Scales
Gestation
Gestation
Loose Housing
Lactating Sow
Stalls
Heating Systems
Hog Heaters
Gas Brooders
Heat Lamps
Heat Pads
Crates & Gates
Farrowing Crates
Gating
Sorting
Sorting Panels
Flooring Systems
Plastic
Wire Mesh
Medicators/Injector Pump
Chemilizer/Parts
Dosatron/Parts
Waterers
Fountain
Nipple
Cup
Trough
Accessories
Manure Agitators & Pumps
Manure Agitators
 
Beef/Dairy Equipment
Storage Tanks
Feed Storage Tanks
Ventilation
Tunnel
Circulation
Soaker Cooling
High Pressure Cooling
Evaporative Cooling
Fans
Belt Drive Fans
Curtain Systems

Sidewall Curtains

Parlor Curtains
Machines/Parts
Silage Baggers/Machines
Kelly Ryan Baggers
Ag-Bag Baggers
Grain Processing Equip.
Roller Mills
Hammer Mills
Storage
Silage Bags
Bunker Covers
Bale Wrap
Waterers
Water Fountains
Accessories
Calf Stalls
Calf Stalls
 
Equine Equipment
Waterers
Fountains
Accessories
 

 

 

 

 


Boots and Unloaders

Lange Ag Systems offers several quality boot and unloader designs
with convenient feed inspection and maintenance features. 

Parabolic Boots
Parabolic Boots
AP's 16" (406mm) parabolic boot (available in straight drop or 30 degree models) is made in our own facility from the very latest in ultra high impact polypropylene for greater flexibility, dependability and durability. Most of our competitors still use the older, ABS plastic, which is stiff, brittle and prone to fracture, cracking and tear-out, especially where it's attached to steel. It is impossible for ABS to be UV stabilized, thus creating a built in deterioration factor over time.

Optional Swing Away Bottom
Single Unloader with optional swing away bottom for 100% clean out.

Feed Tank Unloaders
Designed to fit below the 16" (406mm) plastic and 22" (559mm) metal boots. AP's standard unloaders are available for 2.2" (55mm), 3" (75mm), 3.5"(90mm) and 5" (125mm) Flex-FloT or 4" and 6" rigid auger systems. All AP unloaders have a slide-gate above the auger to meter feed or serve as a complete shutoff ... and a convenient, inspection / clean out plate on the side which is easily removed with two wing nuts.

AP's Clear Boot
Straight Clear Boot
AP's clear boot allows producers to verify at a glance that feed is present in the bin. This boot is injected molded from a specially formulated, ultraviolet stabilized, clear polycarbonate blend and features a heavier wall to prevent cracking. Available in straight or 30 degree boot.

Metal Boots
Heavy Duty Metal Boots
Multiple outlet requirements can be easily handled by our 22" (559 mm) all metal boot. Up to four feed lines.This boot, which can be fitted to any AP feed bin, will allow installation of up to four feed lines in several directions at once.

Straight Drop Boot
Straight Drop Boot
AP manufactures its drop boots from a polypropylene resin blend containing special chemical ultraviolet light inhibitors and impact modifiers to further enhance durability and resilience.

30 Degree Drop Boot
30 degree Drop Boot
A 30 degree drop boot is also available for rigid augering or similar inclined feed delivery systems.

Double Through Unloader
Double - Through Unloader
Most unloaders are available in single or double outlet models, as well as "through" & "twin through" models which can be used in tandem where two tanks are used in line.

 


© 2007 Lange Ag Systems
193 County Road NE
Willmar, MN 56201
Phone: 800.479.0243
Fax: (320) 231-1471
info@langeagsystems.com